If you are replacing just the bushings then continue with this.
Apr 12, Engine: Hi. I’m in the process of replacing the lower control arms on a Ram I have removed the nuts but I can’t seem to be able the remove the bushing bolts.
I have tried to hammer them out and I have tried an impact. Nov 23, Jacked up the frame with stands with enough clearance from the ground.
What Goes Wrong?
Remove tie rod and sway bar. Loosen the nuts on the upper and lower ball joints but leave them connected. Jack up the lower arm make it snug then have at it with the spindle. I kept the lower arm level to the chassis and soak all the bolts/nuts EVERYthing with liquid treegrinding.barted Reading Time: 8 mins. Feb 17, opper Control Arm Bushings To access the upper control arm, remove the shock absorber and the strut bar.
Also, disconnect the sway bar from the lower control arm, if your particular Ram model is equipped with it.
After that, you can hold the coil spring in place with a spring compressor. Nov 23, Remove tie rod and sway bar. Loosen the nuts on the upper and lower ball joints but leave them connected. Jack up the lower arm make it snug then have at it with the spindle.
I kept the lower arm level to the chassis and soak all the bolts/nuts EVERYthing with liquid wrench. Remove the bushings with a bushing service tool (see Resources). When installing the new bushings, do not use lubricant and make sure they seat properly on the control arm bore. Then replace the lower control arm. When finished, take your Dodge vehicle to a good shop to align the front suspension.
Aug 08, Remove the nut using a 14mm or 15mm wrench or socket. There could be a mini taper fit for this connection so you may need to shock it loose much like the ball joint. Grasp the sway bar link and remove it away from the lower control arm mount. This will help the sway bar link stay out of the way during the job.
3. Duralast Control Arm Bushing . Part # SKU # Limited-Lifetime Warranty. Check if this fits your Dodge Ram . Shop for the best Control Arm & Ball Joint Assembly for your Dodge Ramand you can place your order online and pick up for free at your local O'Reill Front Left Lower. Greaseable: Yes. Pre-Greased: A control tree cutting service concord nc and ball joint assembly contains a control arm, ball joint, and bushings and are essential components for.
Dodge Ram 4WDStrut-Mate Front Lower Control Arm Bushing Kit by Monroe. Monroe Strut-Mate Mounting Kits are designed to reduce noise and vibration and should be utilized when replacing conventional struts or springs.
Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself.
Dec 29, LOWER CONTROL ARM BUSHINGS-4X2 (LD) REMOVAL. Remove the lower control arm. Secure the control arm in a soft jaw vise. I have a Dodge Ram SLT quad cab with a hemi and 20" tires. It has 22, mostly highway miles. A couple months ago the dealership found a bad ball joint and changed it out.